Shenzhen Knowhow Technology Co.,limited
Shenzhen Knowhow Technology Co.,limited
Add to Cart
The First Choice For Power Electronics Testing!
HP6015A High Voltage Probe 100MHz Bandwidth 20kV AC/DC Measurement Industrial Grade Safety Design Adaptable Oscilloscope
Product Introduction
1. Ultra-high measurement performance
Supports AC and DC voltage measurement up to 20kV high-precision voltage probe, instantaneous pulse voltage peak up to 40kV (≤100ms), 100MHz bandwidth high-voltage probe, rise time ≤3.5ns, meets the needs of high-frequency and high-voltage scenarios, and is compatible with the HP6015A high-voltage probe standard.
2. Accurate electrical specifications
Input impedance 100MΩ, input capacitance ≤3pF, compensation range 7pF~49pF, input impedance 1MΩ (oscilloscope high-voltage probe adaptation), accuracy ±3%, ensuring reliable measurement data.
3. Multiple safety protection design
Guard ring and grounding terminal double protection, strict warning label prompts operation risks (safe operation of high-voltage measurement probe), supports reliable grounding and power-off operation process to avoid electric shock or equipment damage.
4. Flexible adaptation and convenient operation
Standard straight terminal, hook probe, alligator clip and other test heads, 3-meter BNC connection cable, support handheld or fixed installation, suitable for complex scenarios, perfect match the needs of power electronic test probes.
5. Widely applicable scenarios
Covering power electronics, frequency converters, laser voltage, inverter power supply, motor drive, high-voltage circuit board testing and other fields, the power electronics test probe meets the needs of industrial R&D and experiments.
6. Intelligent compensation calibration function
Provides three-level compensation adjustment of DC accuracy, low-frequency response, and high-frequency response. The high-frequency and high-voltage probe calibration adapts to different oscilloscope input characteristics to ensure accurate waveform without distortion.
7. Durable structure and maintenance recommendations
Protective shell design, working temperature 0-50℃, storage temperature - 40-75℃, it is recommended to check the ground wire regularly, avoid overvoltage use, and extend the service life, which meets the HP6015A high-voltage probe industrial standard.
Product Electrical Specifications
| Test conditions: ambient temperature 25℃ ±5℃, oscilloscope input impedance 1MΩ ±2% | |
| Input impedance | 100MΩ |
| Input capacitance | ≤3pF |
| Compensation range | 7pF~49pF |
| Attenuation multiple | 1000X |
| Maximum measured AC and DC voltage | 20kV (Refer to Figure 1 for maximum input voltage vs frequency curve) |
| Maximum pulse peak voltage | 40kV-pk(≤100ms) |
| Bandwidth | 100MHz |
| Rise time | ≤3.5ns |
| Terminal load | 1MΩ |
| Accuracy | ±3% |
| Temperature coefficient | ≤0.006%/℃ |
| Delay time | 16ns |
Mechanical Specifications
| Probe diameter | 89mm Maximum |
| Probe length | 340mm |
| Output compensation box (L*W*H) | 71.6*30.6*20mm |
| Connection cable length | 3m |
| Weight | 630g |
Environmental Characteristics
| Working temperature and humidity | 0-50℃,80% or less |
| Storage temperature and humidity | -40-75℃,80% or less |
| Working altitude | 2000m |
| Storage altitude | 12000m |
Product Description
①Probe test signal input terminal, equipped with straight terminal, hook-shaped test needle, high-voltage end alligator clip, fixed by M4 thread, the test terminal can be replaced as needed.
②Probe reference ground terminal, standard pluggable alligator clip, when measuring, the probe clip is required to be reliably grounded.
③Probe front end protection ring, when measuring, people are behind the protection ring to ensure personal safety.
④Probe front end handle, when measuring, the probe can be fixed by the handle.
⑤Signal connection line, standard 3-meter BNC connection line.
⑥Probe compensation box, the output interface is a standard male BNC, directly connected to the oscilloscope. If necessary, compensate the probe through the adjustable hole above.