Shenzhen Knowhow Technology Co.,limited
Shenzhen Knowhow Technology Co.,limited
Add to Cart
MEASTEK HCTS3000A High Frequency Bandwidth Flexible Current Probe 30MHz , 3.0KA Peak Current For Current Testing
Wideband high current detection
30MHz high frequency bandwidth, peak current 3.0KA, can effectively measure high frequency and high current, meet the needs of high current test scenarios, such as power bus monitoring.
Low sensitivity and high range
Sensitivity 2mV/A, suitable for high current measurement, can maintain stable measurement performance under this range, and has a wide measurement range.
Advantages of small package measurement
The outer diameter of the induction loop is 1.6mm (1.7mm Max), and the withstand voltage is 1KVpk, which can play a role in the measurement of small package devices and can adapt to complex wiring environments.
Convenient connection design
Standard BNC output interface, convenient for connecting oscilloscopes and other devices. USB 5V power supply, flexible and convenient to use without site restrictions.
Measurement and maintenance specifications
Pay attention to avoid interference sources when measuring, and ensure that the measured wire passes through the center of the probe ring. Regular maintenance to avoid damage to the probe and maintain measurement accuracy.
Specifications
| Model | HCTS3000A | |
| Sensitivity (mV/A) | 2 | |
| Peak | Current (KA) | 3.0 |
| dI/dt(KA/μs) | 70 | |
| Maximum noise (mV Vpp) | 5 | |
| Attenuation characteristics(%/ms) | 2 | |
| Low frequency bandwidth -3dB(Hz) | 2 | |
| High frequency bandwidth -3dB(MHz) | 30 | |
| Typical accuracy | 2% | |
| Insulation voltage value | 1KV | |
HCT(S)XXXXA Series Other Technical Parameters
| Maximum output voltage | 6Vpk | |
| Terminal load | ≥100kΩ | |
| Power supply mode | USB 5V (standard adapter) | |
| Operating temperature range | Integrator | 0℃ - 50℃ |
| Probe ring | 0℃ - 100℃ | |
| Storage temperature range | -40℃～80℃ | |
Product Description
(Take HCTS0120A as an example)
1) Input interface: current probe test signal input terminal.
2) Output interface: current probe integrator signal output terminal.
3) USB 5V power supply interface: standard USB (type B) interface. (USB power supply cable and power adapter are standard)
4) Test connection diagram.
Mechanical specifications
| Model | HCTSXXXXA |
| Typical value of flexible probe circumference (customizable) | 80mm |
| Typical value of induction ring body diameter | 1.6mm |
| Typical value of flexible probe diameter (customizable) | 25mm |
| Induction loop connection cable length | 1 M (customizable) |
| BNC connection cable length | 1 M or 2 M, 1 M is Standard |
| Integrator body dimensions (including BN port dimensions) | About 110(L)*47(W)*30(H)mm |
| USB cable (AM-BM) | About 1.8m |
| USB output adapter | About 59mm*30mm*20mm |
| Probe weight | About 150g |
| Box weight (including probe) | About 960g |
Care And Maintenance
1) Keep the probe clean and dry.
2) If cleaning is required, wipe with a soft dry cloth. Do not use chemical cleaning agents.
3) When the probe is not in use, please put it in the packaging provided and place it in a cool, clean and dry place.
4) When transporting the probe, be sure to put it in the packaging provided by our company to prevent shock.
5) Do not pull the input and output lines hard to avoid excessive twisting, bending or knotting.
Packing List
| Name | Quantity |
| Current probe integrator | 1 piece |
| Current probe flexible induction coil | 1 piece |
| USB output adapter (5V/1A) | 1 piece |
| USB power cable | 1 piece |
| BNC output cable | 1 piece |
| Electronic manual | 1 serving |