Shenzhen Knowhow Technology Co.,limited
Shenzhen Knowhow Technology Co.,limited
Add to Cart
MEASTEK HCTL6000A flexible current probe for current detection in the semiconductor industry
1.With 10MHz bandwidth, it can effectively measure harmonics in current and is often used for current monitoring of semiconductor manufacturing equipment.
2.With 1mV/A sensitivity and 1% typical accuracy, it can accurately measure tiny currents and tiny phase shifts of sine waves, and performs well in semiconductor chip testing.
3.With 10KV insulation withstand voltage, the semiconductor high-voltage current test probe is suitable for large current and high voltage semiconductor switch current measurement occasions.
4.The induction loop has an outer diameter of 8mm, which is soft and flexible, and is convenient for operation in semiconductor device pin current measurement scenarios, such as MOSFET and IGBT devices.
5.USB power supply, low insertion loss, and standard BNC output interface are convenient for connecting various measuring instruments to meet the R&D and production testing needs of the semiconductor industry.
Specifications
| Model | HCTL6000A | |
| Sensitivity (mV/A) | 1 | |
| Peak | Current (KA) | 6.0 |
| dI/dt(KA/μs) | 40 | |
| Maximum noise (mV Vpp) | 5 | |
| Attenuation characteristics(%/ms) | 0.5 | |
| Low frequency bandwidth -3dB(Hz) | 0.6 | |
| High frequency bandwidth -3dB(MHz) | 10 | |
| Typical accuracy | 1% | |
| Insulation voltage value | 10KV | |
HCT(S)XXXXA Series Other Technical Parameters
| Maximum output voltage | 6Vpk | |
| Terminal load | ≥100kΩ | |
| Power supply mode | USB 5V (standard adapter) | |
| Operating temperature range | Integrator | 0℃ - 50℃ |
| Probe ring | 0℃ - 100℃ | |
| Storage temperature range | -40℃～80℃ | |
Product Description
(Take HCTS0120A as an example)
1) Input interface: current probe test signal input terminal.
2) Output interface: current probe integrator signal output terminal.
3) USB 5V power supply interface: standard USB (type B) interface. (USB power supply cable and power adapter are standard)
4) Test connection diagram.
Mechanical specifications
| Model | HCTSXXXXA |
| Typical value of flexible probe circumference (customizable) | 80mm |
| Typical value of induction ring body diameter | 1.6mm |
| Typical value of flexible probe diameter (customizable) | 25mm |
| Induction loop connection cable length | 1 M (customizable) |
| BNC connection cable length | 1 M or 2 M, 1 M is Standard |
| Integrator body dimensions (including BN port dimensions) | About 110(L)*47(W)*30(H)mm |
| USB cable (AM-BM) | About 1.8m |
| USB output adapter | About 59mm*30mm*20mm |
| Probe weight | About 150g |
| Box weight (including probe) | About 960g |
Care And Maintenance
1) Keep the probe clean and dry.
2) If cleaning is required, wipe with a soft dry cloth. Do not use chemical cleaning agents.
3) When the probe is not in use, please put it in the packaging provided and place it in a cool, clean and dry place.
4) When transporting the probe, be sure to put it in the packaging provided by our company to prevent shock.
5) Do not pull the input and output lines hard to avoid excessive twisting, bending or knotting.
Packing List
| Name | Quantity |
| Current probe integrator | 1 piece |
| Current probe flexible induction coil | 1 piece |
| USB output adapter (5V/1A) | 1 piece |
| USB power cable | 1 piece |
| BNC output cable | 1 piece |
| Electronic manual | 1 serving |