Shenzhen Knowhow Technology Co.,limited
Add to Cart
Mastek MCTH200A 200A High-Accuracy Current Sensor 0.01% Error Rate For Wind Energy , EVs & Missile Systems
High-Current Measurement:Supports up to 200A DC/AC with 1:2000 current ratio, ideal for EV charging stations and missile testing.
Temperature Stability:Advanced thermal compensation ensures ±0.004μA offset drift across -10°C to +70°C.
Wide Bandwidth:100KHz bandwidth captures high-frequency signals in wind turbine inverters and power analyzers.
Low Power Loss:Minimal insertion loss (<0.01%) maximizes efficiency in energy-critical systems.
Safety Assurance:5KV isolation voltage and error signal output protect against overloads in naval or aerospace setups.
Specifications
| Model | Maximum current | Accuracy | Bandwidth | Current transfer ratio | |
| DC | RMS | ||||
| MCTH200A | 200A | 200A | 0.01% | 100KHz | 1:2000 |
Electrical properties
| Item | Symbol | Test Conditions | Minimum | Nominal | Maximum | Unit |
| Maximum continuous DC current | IPN_DC | - | 60 | - | 300 | Adc |
| Corresponding measurement current range (Arms) | IP | - | 60 | - | 300 | Aac |
| Primary-secondary conversion ratio | KN | - | 1:600 | - | 1:2000 | - |
| Rated output current (mArms) | Isn | Primary rated current | 100 | - | 150 | mA |
| Power supply voltage (±5%) | Vc | - | - | ±15 | - | V |
| Power consumption | Ic | - | 15mA +Is | - | 35mA +Is | MA |
| Load resistance (@Vc=±15V) | RL | - | ≤50Ω(@Ip=DC60A) | - | ≤50Ω(@Ip=DC300A) | Ω |
| Secondary resistance | Rs | - | ≈6 | - | ≈28 | Ω |
| Power frequency withstand voltage (50HZ, 1min) | Vd | - | - | 5 | - | KV |
| Insulation resistance | Ri | - | - | ＞2000MΩ@DC500V | - | Ω |
Accuracy Measurement
| Item | Symbol | Test Conditions | Minimum | Nominal | Maximum | Unit |
| Accuracy (@Ta = +25℃) | XG | Input DC, full temperature range | - | - | 0.01 | % |
| Linearity error | EL | Full range | - | - | 0.005 | % |
| Offset current (@Ta =+25℃) | Ioff | Full temperature range | - | - | ≤|±0.004|μA | μA |
| Response time | Tr | di/dt=100A/μs, rise to 90% IPN | - | - | ≤1 | μs |
| Following speed | di/dt | - | >60 | - | >100 | A/μs |
| Frequency range | f | - | 0 | - | 100 | KHz |
General Features
| Item | Symbol | Test Conditions | Minimum | Nominal | Maximum | Unit |
| Operating temperature range | Ta | - | -10 | - | +70 | ℃ |
| Storage temperature range | Ts | - | -25 | - | +80 | ℃ |
| Working humidity (no condensation) | Hw | - | 20 | - | 90 | % |
| Weight | W | - | - | ±1200 | - | g |
| Execution standard | St | EN50178 | ||||
| Casing material | Encl | Compliant with UL94-V0 | ||||
Structure Diagram
| Basic dimensional error | ±0.2mm |
| Primary aperture | Φ30mm |
| Disc installation | Bottom:6 x Φ4mm Side:4 x Φ4mm |
| Output terminal | DB9 MALE |
Packing List
| Name | Quantity |
| Current sensor body | 1 piece |
| Electronic manual | 1 copy |
| Warranty card | 1 piece |